At AccuTemp we offer regular maintenance for our clients’ commercial HVAC systems because the last thing you want or need is to have an equipment failure during business hours. Our professionally trained technicians thoroughly test your equipment to ensure that it is operating accurately and reliably according to our commercial HVAC maintenance agreements.
Routine maintenance is crucial in order to extend the life of your equipment. Our commercial HVAC services can help save you hefty repair costs that are often due to premature AC system failures. We can make sure your equipment and HVAC systems continue to operate at peak efficiency, resulting in lower monthly energy costs.
Air Handler Inside Unit Checklist
Dirty air filters
are a frequent cause of low suction pressure in air conditioning systems and high-temperature rise in heating systems. Dirt will also collect on evaporator coils. Improper filtration of the home can cause excessive dust in the house and compound allergy problems.
A dirty evaporator coil
restricts air flow and prevents proper transfer of heat to the refrigerant and can cause compressor failure. Compressors are not designed to pump liquid refrigerant, and this can cause the compressor to fail.
Algae can cause blockage in the drain line, resulting in overflow of up to 15 gallons per day. Extensive ceiling and floor damage may occur.
Symptoms are similar to a dirty evaporator coil. You may experience sudden loss of heating under peak load conditions or excessive heat due to low air flow which can damage heating coils.
This can damage the high limit safety switch, heat exchanger or heating elements and shorten the life of the furnace.
When a maximum temperature rise is reached with a minimum amount of air flowing, it can possibly cause damage to the heater. When a minimum temperature rise is reached with a maximum of air flowing, it can lead to cold drafts.
These are caused by loose connections and overheating. This can lead to a sudden loss of heating under peak load conditions.
Such an issue can cause sudden loss of heating under peak load conditions, damage heating units, or shut down entire systems.
A damaged thermostat leads to uncomfortable temperature swings in living areas and can damage compressors.
This can make for uncomfortable temperature swings and damage the thermostat. It greatly affects the heating efficiency of the furnace.
This is the result of poor design, installation, or damaged ducts, which increase utility costs, cause rooms or areas of the home to feel uncomfortable, and shorten the life span of all HVAC equipment.
Outside Condensing Unit Checks
The lack of cooling air doesn’t remove heat from refrigerant properly. Since refrigerant also cools the compressor, it can cause the compressor to overheat and fail.
Often the system capacity is reduced, and oil return problems are frequently experienced with undersized lines. This can shorten the life of the compressor and increase cooling/heating bills.
Indicates compressor overworked and bearings seizing up. It can also damage the capacitor or overcharged unit.
Issues are caused by overworking the compressor. Weak or faulty capacitors will reduce starting ability and cause compressors not to run smoothly, which will cause compressors to overheat and fail. A higher than normal amperage usually indicates a weak capacitor.
Weak or faulty capacitors will reduce starting torque for compressors. The compressor will overheat and fail. Be sure to check the potential relay before the unit is placed back in service, or the new capacitor may be damaged.
Call us today at 602-957-3745